PRemoteConnection Class Reference

#include <remconn.h>

Inheritance diagram for PRemoteConnection:

List of all members.

Error/Status functions
enum	Status {   Idle, Connected, InProgress, LineBusy,   NoDialTone, NoAnswer, PortInUse, NoNameOrNumber,   AccessDenied, HardwareFailure, GeneralFailure, ConnectionLost,   NotInstalled, NumStatuses }
	Status codes for remote connection. More...
Status	GetStatus () const
DWORD	GetErrorCode () const
Information functions
const PString &	GetName () const
PString	GetAddress ()
static PStringArray	GetAvailableNames ()
Configuration functions
Status	GetConfiguration (Configuration &config)
Status	SetConfiguration (const Configuration &config, PBoolean create=PFalse)
static Status	GetConfiguration (const PString &name, Configuration &config)
static Status	SetConfiguration (const PString &name, const Configuration &config, PBoolean create=PFalse)
static Status	RemoveConfiguration (const PString &name)
Public Member Functions
Overrides from class PObject
virtual Comparison	Compare (const PObject &obj) const
virtual PINDEX	HashFunction () const
Dial/Hangup functions
PBoolean	Open (PBoolean existing=PFalse)
PBoolean	Open (const PString &name, PBoolean existing=PFalse)
PBoolean	Open (const PString &name, const PString &username, const PString &password, PBoolean existing=PFalse)
void	Close ()
Protected Attributes
PString	remoteName
PString	userName
PString	password
DWORD	osError
PString	pppDeviceName
PPipeChannel *	pipeChannel
PBoolean	wasConnected
Status	status
PString	deviceStr
Classes
struct	Configuration
	Structure for a RAS configuration. More...

---

Detailed Description

Remote Access Connection class.

---

Member Enumeration Documentation

enum PRemoteConnection::Status

Status codes for remote connection.

Enumerator:

Idle	Connection has not been made and no attempt is being made.
Connected	Connection is completed and active.
InProgress	Connection is in progress.
LineBusy	Connection failed due to the line being busy.
NoDialTone	Connection failed due to the line havin no dial tone.
NoAnswer	Connection failed due to the remote not answering.
PortInUse	Connection failed due to the port being in use.
NoNameOrNumber	Connection failed due to the RAS setting name/number being incorrect.
AccessDenied	Connection failed due to insufficient privilege.
HardwareFailure	Connection failed due to a hardware failure.
GeneralFailure	Connection failed due to a general failure.
ConnectionLost	Connection was lost after successful establishment.
NotInstalled	The Remote Access Operating System support is not installed.
NumStatuses

---

Constructor & Destructor Documentation

PRemoteConnection::PRemoteConnection

(

)

Create a new remote connection.

PRemoteConnection::PRemoteConnection

(

const PString &

name

)

Create a new remote connection. This will initiate the connection using the specified settings.

Parameters:

name	Name of RAS configuration.

PRemoteConnection::~PRemoteConnection

(

)

Disconnect remote connection.

PRemoteConnection::PRemoteConnection

(

)

Create a new remote connection.

PRemoteConnection::PRemoteConnection

(

const PString &

name

)

Create a new remote connection. This will initiate the connection using the specified settings.

Parameters:

name	Name of RAS configuration.

PRemoteConnection::~PRemoteConnection

(

)

Disconnect remote connection.

---

Member Function Documentation

virtual Comparison PRemoteConnection::Compare

(

const PObject &

obj

)

const [virtual]

Compare two connections.

Returns:

EqualTo of same RAS connectionconfiguration.

Parameters:

obj	Another connection instance.

Reimplemented from PObject.

virtual PINDEX PRemoteConnection::HashFunction

(

)

const [virtual]

Get has value for the connection

Returns:

Hash value of the connection name string.

Reimplemented from PObject.

PBoolean PRemoteConnection::Open

(

PBoolean

existing = PFalse

)

Open the remote connection.

Parameters:

existing

Flag for open only if already connected.

PBoolean PRemoteConnection::Open	(	const PString &	name,
		PBoolean	existing = PFalse
	)

Open the remote connection.

Parameters:

name	RAS name of of connection to open.
existing	Flag for open only if already connected.

PBoolean PRemoteConnection::Open	(	const PString &	name,
		const PString &	username,
		const PString &	password,
		PBoolean	existing = PFalse
	)

Open the remote connection.

Parameters:

name	RAS name of of connection to open.
username	Username for remote log in.
password	password for remote log in.
existing	Flag for open only if already connected.

void PRemoteConnection::Close

(

)

Close the remote connection. This will hang up/dosconnect the connection, net access will no longer be available to this site.

Status PRemoteConnection::GetStatus

(

)

const

Get the current status of the RAS connection.

Returns:

Status code.

DWORD PRemoteConnection::GetErrorCode

(

)

const [inline]

Get the error code for the last operation.

Returns:

Operating system error code.

const PString& PRemoteConnection::GetName

(

)

const [inline]

Get the name of the RAS connection.

Returns:

String for IP address, or empty string if none.

PString PRemoteConnection::GetAddress

(

)

Get the IP address in dotted decimal form for the RAS connection.

Returns:

String for IP address, or empty string if none.

static PStringArray PRemoteConnection::GetAvailableNames

(

)

[static]

Get an array of names for all of the available remote connections on this system.

Returns:

Array of strings for remote connection names.

Status PRemoteConnection::GetConfiguration

(

Configuration &

config

)

Get the configuration of the specified remote access connection.

Returns:

Connected# if the configuration information was obtained, NoNameOrNumber# if the particular RAS name does not exist, NotInstalled# if there is no RAS support in the operating system, GeneralFailure# on any other error.

Parameters:

config

Configuration of remote connection

static Status PRemoteConnection::GetConfiguration	(	const PString &	name,
		Configuration &	config
	)			[static]

Get the configuration of the specified remote access connection.

Returns:

Connected# if the configuration information was obtained, NoNameOrNumber# if the particular RAS name does not exist, NotInstalled# if there is no RAS support in the operating system, GeneralFailure# on any other error.

Parameters:

name	Remote connection name to get configuration
config	Configuration of remote connection

Status PRemoteConnection::SetConfiguration	(	const Configuration &	config,
		PBoolean	create = PFalse
	)

Set the configuration of the specified remote access connection.

Returns:

Connected# if the configuration information was set, NoNameOrNumber# if the particular RAS name does not exist, NotInstalled# if there is no RAS support in the operating system, GeneralFailure# on any other error.

Parameters:

config	Configuration of remote connection
create	Flag to create connection if not present

static Status PRemoteConnection::SetConfiguration	(	const PString &	name,
		const Configuration &	config,
		PBoolean	create = PFalse
	)			[static]

Set the configuration of the specified remote access connection.

Returns:

Connected# if the configuration information was set, NoNameOrNumber# if the particular RAS name does not exist, NotInstalled# if there is no RAS support in the operating system, GeneralFailure# on any other error.

Parameters:

name	Remote connection name to configure
config	Configuration of remote connection
create	Flag to create connection if not present

static Status PRemoteConnection::RemoveConfiguration

(

const PString &

name

)

[static]

Remove the specified remote access connection.

Returns:

Connected# if the configuration information was removed, NoNameOrNumber# if the particular RAS name does not exist, NotInstalled# if there is no RAS support in the operating system, GeneralFailure# on any other error.

Parameters:

name	Remote connection name to configure

---

Member Data Documentation

PString PRemoteConnection::remoteName [protected]

PString PRemoteConnection::userName [protected]

PString PRemoteConnection::password [protected]

DWORD PRemoteConnection::osError [protected]

PString PRemoteConnection::pppDeviceName [protected]

PPipeChannel* PRemoteConnection::pipeChannel [protected]

PBoolean PRemoteConnection::wasConnected [protected]

Status PRemoteConnection::status [protected]

PString PRemoteConnection::deviceStr [protected]

---

The documentation for this class was generated from the following file:

• remconn.h

---